Yep, we may get a tiny thank-you (read: commission) when you buy through
links on Gadgetspotr — not enough for a yacht, but enough to keep the lights (and
servers) on.
Learn more
35
Highlights
61
Differences
5
Reactions
0
Likes
ANYCUBIC Kobra Neo
vs
Creality Ender-3:
35 Highlights & 61 Differences —
So, Which 3D Printer Actually Works Better
Learn which printer suits beginners with ease of use and which one appeals more to tinkerers and pros.
Gadget showdown: ANYCUBIC Kobra Neo vs Creality Ender-3 — see how they match up in performance, features, and weight, package weight, space requirement & supported filament types.
Anycubic Kobra Neo vs Creality Ender-3: A Comprehensive 3D Printer Face-Off
When it comes to budget-friendly yet capable 3D printers, the Anycubic Kobra Neo and the Creality Ender-3 stand out as top contenders. Both are FDM/FFF-type printers designed primarily for consumers and educational users with a focus on prototyping and miniatures. They each support single-extruder setups and accept the ubiquitous 1.75 mm filament diameter. However, these machines embody different philosophies: the Kobra Neo leans into user convenience and modern features with its preassembled build and enhanced automation, whereas the Ender-3 embraces a hands-on, kit-based assembly that appeals to those wanting more control and customization flexibility.
While both printers operate within similar dimensional footprints, the Kobra Neo boasts a significantly larger build volume (~1845.77 cm³ vs ~738.4 cm³), promising bigger prints. Their shared support for materials like PLA and ABS is common, but Ender-3 supports a wider range of filaments, including advanced options like Nylon and Carbon Fiber, giving it an edge in material versatility. Both printers come with open-frame Cartesian designs but diverge in user interface and leveling technology, affecting ease of use and print reliability.
Unpacking the User-Centric Features of Anycubic Kobra Neo
The Kobra Neo arrives practically ready to print with a prebuilt design that greatly reduces the initial setup time, making it especially attractive for beginners or those who want to avoid tedious assembly. Its generous build volume of 8.66 x 8.66 x 9.84 inches (approx. 1845.77 cm³) surpasses many entry-level printers, opening up possibilities for larger projects. This printer's automatic bed leveling, paired with a sensor-driven first layer calibration, removes much of the guesswork and manual tweaking commonly associated with 3D printing. The direct drive extruder supports flexible filaments more reliably than Bowden systems, ideal for materials like TPU and wood-based filaments, expanding creative options
It also integrates a filament runout sensor and power loss recovery, which help prevent failed prints due to interruptions. The Kobra Neo's 2.4-inch touchscreen (2.4") enhances navigation through an intuitive, modern interface. Plus, it boasts tool-free maintenance and built-in self-diagnostics, a rarity in this price class. Overall, these features collectively underscore Kobra Neo's focus on accessibility and streamlined user experience.
Creality Ender-3: Enduring Appeal with Versatile Filament Support
The Ender-3 offers a different proposition with its DIY kit format, perfect for hobbyists who enjoy tinkering. Despite requiring assembly, this model supports an impressive variety of filaments, including Nylon, Carbon Fiber, PVA, PC, ASA, HIPS, and Wood, catering to users eager to experiment with advanced or specialty materials. While its build volume is considerably smaller (8.6 x 8.6 x 9.8 inches), the Ender-3 makes up for this with a higher maximum print speed of 180 mm/s versus 100 mm/s on the Kobra Neo, potentially reducing print times. The printer employs a Bowden extruder system, which offers certain benefits with rigid filaments but may struggle with flow control on flexible materials.
Its screen is larger at 2.8 inches, though not touch-enabled, relying instead on traditional knob controls. Users comfortable with manual adjustments will appreciate the manual bed leveling approach that the Ender-3 supports, while the printer also benefits from a proven upgrade ecosystem, from multi-material kits to laser engravers, making it highly customizable. Additionally, this printer has earned RoHS certification alongside CE and FCC, emphasizing safety compliance. If assembly and fine-tuning are not obstacles, the Ender-3 remains an enduring classic in the 3D printing community with robust software compatibility.
Quick Take
The Anycubic Kobra Neo excels in delivering a beginner-friendly experience with preassembly, automatic leveling, and smart sensors, plus generous print volume; all at a competitive price of $149 at store.anycubic.com. Meanwhile, the Creality Ender-3 stands out for its material versatility, faster maximum speeds, and upgrade potential, appealing to users who like to DIY and experiment beyond standard filaments.
Bottom Line
For newcomers or those seeking hassle-free printing with modern conveniences and more print space, the Anycubic Kobra Neo is the better pick. It simplifies setup without sacrificing essential features, offering outstanding value under $150. On the other hand, the Creality Ender-3 remains a solid choice for tinkerers ready to invest time in its assembly and maintenance, gaining access to broader filament compatibility and accelerated print speeds.
Verdict
Winner: Anycubic Kobra Neo; Superior out-of-the-box ease, larger build volume, auto-leveling, and valuable sensor features make it ideal for beginners and those wanting reliable prints quickly.
Runner-up: Creality Ender-3; Offers more filament choices, faster speeds, and an extensive upgrade ecosystem at the cost of assembly effort and smaller print volume.
Side by side. The numbers. The features. No drama.
From feature sets to real-life wins and flaws, this 3d printers comparison between ANYCUBIC Kobra Neo and Creality Ender-3 helps you cut through the noise.
The printer is manufactured in China, a major global hub for 3D printer production.
The country where the product is designed or manufactured.
In the battle of Country of Origin,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Country of Origin on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
In the battle of Warranty Period,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Warranty Period on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Printer Type
What type of printer is it?
0
ANYCUBIC Kobra Neo
0Votes
FDM/FFF
0
Creality Ender-3
0Votes
FDM/FFF
ANYCUBIC Kobra Neo
This is an FDM/FFF (Fused Deposition Modeling/Fused Filament Fabrication) printer, which works by extruding molten thermoplastic filament layer by layer.
Creality Ender-3
This printer operates using the FDM/FFF (Fused Deposition Modeling / Fused Filament Fabrication) technology. It builds objects layer by layer by extruding melted thermoplastic filament.
Defines the printing technology used by the machine.
In the battle of Printer Type,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Printer Type on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Assembly Type
What is the assembly type?
0
ANYCUBIC Kobra Neo
0Votes
Prebuilt
0
Creality Ender-3
0Votes
Kit
vs
Assembly Type
The ANYCUBIC Kobra Neo is a Prebuilt printer, offering immediate use, while the Creality Ender-3 comes as a Kit, requiring assembly. The Kobra Neo is ideal for users seeking a quicker setup.
Shows whether the printer is sold as a kit requiring assembly or fully prebuilt.
In the battle of Assembly Type,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Assembly Type on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
This printer is well-suited for a variety of applications including Prototyping, creating Miniatures, and Engineering functional parts. Its versatility makes it useful for both hobbyists and educational settings.
Lists the most common applications supported.
In the battle of Supported Applications,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Supported Applications on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Product Name
What is the product name?
0
ANYCUBIC Kobra Neo
0Votes
Anycubic Kobra Neo
0
Creality Ender-3
0Votes
Creality Ender-3
The commercial name of the 3D printer.
In the battle of Product Name,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Product Name on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Model Number
What is the model number?
0
ANYCUBIC Kobra Neo
0Votes
Kobra Neo
0
Creality Ender-3
0Votes
Ender-3
Manufacturer’s reference code for precise identification.
In the battle of Model Number,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Model Number on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Release Year
What is the release year?
0
ANYCUBIC Kobra Neo
0Votes
2022
0
Creality Ender-3
0Votes
2018
vs
Release Year
ANYCUBIC Kobra Neo was released in 2022, making it a newer model compared to Creality Ender-3, which was released in 2018. The Kobra Neo benefits from more recent design and technology.
The year the 3D printer was first released.
In the battle of Release Year,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Release Year on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Intended Use
What is the intended use?
0
ANYCUBIC Kobra Neo
0Votes
Consumer, Educational
0
Creality Ender-3
0Votes
Consumer, Educational
Identifies the main user category.
In the battle of Intended Use,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Intended Use on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Target User Level
What is the target user level?
0
ANYCUBIC Kobra Neo
0Votes
Beginner
0
Creality Ender-3
0Votes
Beginner, Intermediate
vs
Target User Level
ANYCUBIC Kobra Neo is aimed at Beginner users, whereas Creality Ender-3 targets Beginner and Intermediate users. The Ender-3 provides room for growth for users looking to advance their skills.
Indicates the recommended skill level.
In the battle of Target User Level,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Target User Level on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Assembly Required
Is assembly required?
Yes
0Votes
ANYCUBIC Kobra Neo
Yes
0Votes
Creality Ender-3
States if the printer requires assembly.
In the battle of Assembly Required,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Assembly Required on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
The ANYCUBIC Kobra Neo weighs 16.31 lbs (7.40 kg), which is slightly heavier than the Creality Ender-3 at 15.21 lbs (6.90 kg). The Kobra Neo has a marginally more substantial build.
Net weight of the printer.
In the battle of Weight,
ANYCUBIC Kobra Neo ◉ is
worse than
Creality Ender-3 ◉
, delivering
higher
1.1 lbs
measurement.
Don’t keep it to yourself — be the first to react and review the
Weight on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
The printer requires a space of 2.34 sq ft, which is about 0.22 m², for optimal operation and clearance.
The minimum flat surface area needed to safely place the printer.
In the battle of Space Requirement,
ANYCUBIC Kobra Neo ◉ is
worse than
Creality Ender-3 ◉
, delivering
higher
0.3 sq ft
measurement.
Don’t keep it to yourself — be the first to react and review the
Space Requirement on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
In the battle of Package Weight,
ANYCUBIC Kobra Neo ◉ is
worse than
Creality Ender-3 ◉
, delivering
higher
2.2 lbs
measurement.
Don’t keep it to yourself — be the first to react and review the
Package Weight on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Height
What is the printer’s height?
19.29
inch
0Votes
18.31
inch
0Votes
Creality Ender-3
The printer has a height of 18.31 inches (46.5 cm). This measurement indicates its vertical dimension when fully assembled.
The total external height of the printer.
In the battle of Height,
ANYCUBIC Kobra Neo ◉ is
worse than
Creality Ender-3 ◉
, delivering
higher
1.0 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Height on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Width
What is the printer’s width?
17.52
inch
0Votes
17.32
inch
0Votes
The total external width of the printer.
In the battle of Width,
ANYCUBIC Kobra Neo ◉ is
worse than
Creality Ender-3 ◉
, delivering
higher
0.2 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Width on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Depth
What is the printer’s depth?
17.44
inch
0Votes
16.14
inch
0Votes
The total external depth of the printer.
In the battle of Depth,
ANYCUBIC Kobra Neo ◉ is
worse than
Creality Ender-3 ◉
, delivering
higher
1.3 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Depth on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Folded Width
What is the folded width?
Who knows?
0Votes
ANYCUBIC Kobra Neo
(Help us out by suggesting one!)
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Width of the printer when folded (if applicable).
Don’t keep it to yourself — be the first to react and review the
Folded Width on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Folded Depth
What is the folded depth?
Who knows?
0Votes
ANYCUBIC Kobra Neo
(Help us out by suggesting one!)
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Depth of the printer when folded.
Don’t keep it to yourself — be the first to react and review the
Folded Depth on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Folded Height
What is the folded height?
Who knows?
0Votes
ANYCUBIC Kobra Neo
(Help us out by suggesting one!)
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Height of the printer when folded.
Don’t keep it to yourself — be the first to react and review the
Folded Height on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Package Width
What is the package width?
19.69
inch
0Votes
18.9
inch
0Votes
Width of the printer’s packaging.
In the battle of Package Width,
ANYCUBIC Kobra Neo ◉ is
worse than
Creality Ender-3 ◉
, delivering
higher
0.8 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Package Width on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Package Depth
What is the package depth?
19.29
inch
0Votes
18.9
inch
0Votes
Depth of the printer’s packaging.
In the battle of Package Depth,
ANYCUBIC Kobra Neo ◉ is
worse than
Creality Ender-3 ◉
, delivering
higher
0.4 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Package Depth on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Package Height
What is the package height?
8.86
inch
0Votes
9.84
inch
0Votes
Height of the printer’s packaging.
In the battle of Package Height,
ANYCUBIC Kobra Neo ◉ is
better than
Creality Ender-3 ◉
, delivering
lower
1.0 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Package Height on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Build-to-Printer Size Ratio
What is the build-to-printer size ratio?
35
%
0Votes
26.83
%
0Votes
vs
Build-to-Printer Size Ratio
The ANYCUBIC Kobra Neo has a build-to-printer size ratio of 35%, significantly higher than the Creality Ender-3's 26.83%. The Kobra Neo makes more efficient use of its physical footprint for its build volume.
The efficiency ratio of build volume relative to the overall printer size.
In the battle of Build-to-Printer Size Ratio,
ANYCUBIC Kobra Neo ◉ is
better than
Creality Ender-3 ◉
, delivering
higher
8.2 %
measurement.
Don’t keep it to yourself — be the first to react and review the
Build-to-Printer Size Ratio on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
The idle power consumption of the printer is 15 Watts. This is the amount of electricity the printer uses when it is powered on but not actively printing.
Power drawn while the printer is on but not printing.
In the battle of Idle Power Consumption,
ANYCUBIC Kobra Neo ◉ is
worse than
Creality Ender-3 ◉
, delivering
higher
5.0 Watt
measurement.
Don’t keep it to yourself — be the first to react and review the
Idle Power Consumption on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Power Consumption
What is the power consumption?
400
Watt
0Votes
270
Watt
1Votes
vs
Power Consumption
ANYCUBIC Kobra Neo consumes 400 Watt, considerably more than Creality Ender-3's 270 Watt. The Ender-3 is the more energy-efficient option during operation.
Average power usage during active printing.
In the battle of Power Consumption,
ANYCUBIC Kobra Neo ◉ is
worse than
Creality Ender-3 ◉
, delivering
higher
130.0 Watt
measurement.
Based on community votes for Power Consumption,
ANYCUBIC Kobra Neo ◉ earned
0 votes,
less than
Creality Ender-3 ◉,
which got 1 votes.
I'm leaning towards the Ender-3 because of its lower power consumption. Over time that'll save quite a bit on electricity bills, so it's a win.
See more
Operating Temperature Range
What is the operating temperature range?
0
ANYCUBIC Kobra Neo
0Votes
46.4-104°F
0
Creality Ender-3
0Votes
59-86°F
Creality Ender-3
The optimal operating temperature range for the printer is 59-86°F (15-30°C). Maintaining this environment helps ensure stable print quality and prevents thermal issues.
Recommended ambient temperature range for safe operation.
In the battle of Operating Temperature Range,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Operating Temperature Range on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Storage Temperature Range
What is the storage temperature range?
0
ANYCUBIC Kobra Neo
0Votes
-4-122°F
0
Creality Ender-3
0Votes
32-104°F
Creality Ender-3
The recommended storage temperature range for the printer is 32-104°F (0-40°C). Storing the printer within this range helps prevent damage to sensitive components and filament materials.
Safe temperature range for storing the printer when not in use.
In the battle of Storage Temperature Range,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Storage Temperature Range on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Storage Humidity Range
What is the storage humidity range?
0
ANYCUBIC Kobra Neo
0Votes
10-90%
0
Creality Ender-3
0Votes
20-80%
ANYCUBIC Kobra Neo
The recommended storage humidity range of 10-90% ensures the printer components are kept in optimal conditions when not in use.
Safe humidity range for storing the printer.
In the battle of Storage Humidity Range,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Storage Humidity Range on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Power Supply Type
What type of power supply does it use?
0
ANYCUBIC Kobra Neo
0Votes
Internal
0
Creality Ender-3
0Votes
External
vs
Power Supply Type
ANYCUBIC Kobra Neo features an Internal power supply, while Creality Ender-3 uses an External power supply. The Kobra Neo offers a tidier workspace with its integrated power unit.
Indicates whether the printer uses an internal or external power supply.
In the battle of Power Supply Type,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Power Supply Type on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Power Supply Voltage
What is the required power supply voltage?
0
ANYCUBIC Kobra Neo
0Votes
110-220 Volt
0
Creality Ender-3
0Votes
100-240 Volt
ANYCUBIC Kobra Neo
The power supply supports a voltage range of 110-220 Volt, making it compatible with various electrical systems worldwide.
Voltage input supported by the printer’s power supply.
In the battle of Power Supply Voltage,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Power Supply Voltage on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Operating Humidity Range
What is the operating humidity range?
0
ANYCUBIC Kobra Neo
0Votes
20-80%
0
Creality Ender-3
0Votes
20-80%
Acceptable humidity range during printer operation.
In the battle of Operating Humidity Range,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Operating Humidity Range on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Energy Saving Mode
Does it have energy saving mode?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Whether the printer includes an energy-saving or eco mode.
In the battle of Energy Saving Mode,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Energy Saving Mode on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
The ANYCUBIC Kobra Neo has a max bed temperature of 230°F (110°C), warmer than the Creality Ender-3's 212°F (100°C). The Kobra Neo's hotter bed is beneficial for better adhesion, especially with certain filament types.
Maximum heated bed temperature.
In the battle of Max Bed Temperature,
ANYCUBIC Kobra Neo ◉ is
better than
Creality Ender-3 ◉
, delivering
higher
18.0 °F
measurement.
Don’t keep it to yourself — be the first to react and review the
Max Bed Temperature on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
The ANYCUBIC Kobra Neo boasts a generous build volume of 1845.77 cubic inches, which is substantially larger than the Creality Ender-3's 738.4 cubic inches. The Kobra Neo provides significantly more space for printing larger objects.
total printable volume capacity.
In the battle of Build Volume,
ANYCUBIC Kobra Neo ◉ is
better than
Creality Ender-3 ◉
, delivering
higher
1,107.4 cubic in
measurement.
Based on community votes for Build Volume,
ANYCUBIC Kobra Neo ◉ earned
1 votes,
more than
Creality Ender-3 ◉,
which got 0 votes.
ANYCUBIC Kobra Neo has a maximum layer resolution of 300 microns, whereas Creality Ender-3 offers a higher maximum of 400 microns. The Ender-3 can print thicker layers, which might result in faster prints.
Thickest layer height achievable.
In the battle of Layer Resolution Maximum,
ANYCUBIC Kobra Neo ◉ is
worse than
Creality Ender-3 ◉
, delivering
lower
100.0 microns
measurement.
Don’t keep it to yourself — be the first to react and review the
Layer Resolution Maximum on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
ANYCUBIC Kobra Neo can reach a max extruder temperature of 500°F (260°C), slightly higher than Creality Ender-3's 491°F (255°C). The Kobra Neo supports a broader range of filaments requiring higher melting points.
Maximum heating capability of extruder.
In the battle of Max Extruder Temperature,
ANYCUBIC Kobra Neo ◉ is
better than
Creality Ender-3 ◉
, delivering
higher
9.0 °F
measurement.
Don’t keep it to yourself — be the first to react and review the
Max Extruder Temperature on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
vs
Optional Nozzle Sizes
ANYCUBIC Kobra Neo offers optional nozzle sizes including 0.2mm, 0.3mm, 0.6mm, and 0.8mm, while this information is unavailable for Creality Ender-3. The Kobra Neo provides more flexibility for different print details and speeds.
Alternative nozzle sizes supported.
Don’t keep it to yourself — be the first to react and review the
Optional Nozzle Sizes on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Build Width
What is the build width?
8.66
inch
0Votes
8.6
inch
0Votes
ANYCUBIC Kobra Neo
The build width measures 8.66 inch, which is approximately 22.00 cm, defining the maximum dimension of objects that can be printed along the X-axis.
Creality Ender-3
The maximum build width is 8.6 inches (21.8 cm). This dimension defines the printable area along the X-axis.
Maximum printable width of the build area.
In the battle of Build Width,
ANYCUBIC Kobra Neo ◉ is
better than
Creality Ender-3 ◉
, delivering
higher
0.1 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Build Width on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Build Depth
What is the build depth?
8.66
inch
0Votes
8.6
inch
0Votes
ANYCUBIC Kobra Neo
The build depth is 8.66 inch, equivalent to 22.00 cm, specifying the maximum print dimension along the Y-axis.
Creality Ender-3
The maximum build depth is 8.6 inches (21.8 cm). This measurement defines the printable area along the Y-axis.
Maximum printable depth of the build area.
In the battle of Build Depth,
ANYCUBIC Kobra Neo ◉ is
better than
Creality Ender-3 ◉
, delivering
higher
0.1 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Build Depth on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Layer Resolution Minimum
What is the minimum layer resolution?
50
microns
0Votes
50
microns
0Votes
Creality Ender-3
The minimum layer resolution is 50 microns. This capability allows the printer to produce very fine details and achieve smooth surface finishes on printed objects.
Finest layer height achievable.
In the battle of Layer Resolution Minimum,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
, delivering
equal
50.00 microns
measurement.
Don’t keep it to yourself — be the first to react and review the
Layer Resolution Minimum on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Min Extruder Temperature
What is the min extruder temperature?
200
°F
0Votes
356
°F
0Votes
Creality Ender-3
The minimum extruder temperature is 356°F (180°C). This temperature is crucial for ensuring proper filament melting and extrusion, especially for lower-temperature materials like PLA.
Lowest operable extruder temperature.
In the battle of Min Extruder Temperature,
ANYCUBIC Kobra Neo ◉ is
better than
Creality Ender-3 ◉
, delivering
lower
156.0 °F
measurement.
Don’t keep it to yourself — be the first to react and review the
Min Extruder Temperature on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Number of Extruders
How many extruders does the printer have?
0
ANYCUBIC Kobra Neo
0Votes
Single
0
Creality Ender-3
0Votes
1
Creality Ender-3
The printer is equipped with 1 extruder. This configuration is standard for single-color or single-material prints.
total extruders installed.
In the battle of Number of Extruders,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Number of Extruders on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Standard Nozzle Diameter
What is the standard nozzle diameter?
0.4
mm
0Votes
0.4
mm
0Votes
Default nozzle diameter provided.
In the battle of Standard Nozzle Diameter,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
, delivering
equal
0.40 mm
measurement.
Don’t keep it to yourself — be the first to react and review the
Standard Nozzle Diameter on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Filament Diameter Supported
What filament diameter is supported?
1.75
mm
0Votes
1.75
mm
0Votes
The filament size compatible with printer.
In the battle of Filament Diameter Supported,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
, delivering
equal
1.75 mm
measurement.
Don’t keep it to yourself — be the first to react and review the
Filament Diameter Supported on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Bed Temperature Gradient
What is the bed temperature gradient?
5
°F
0Votes
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Variance in heat across the bed surface.
Don’t keep it to yourself — be the first to react and review the
Bed Temperature Gradient on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Heated Chamber
Does the printer have a heated chamber?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Whether the printer has a heated build chamber.
In the battle of Heated Chamber,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Heated Chamber on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Chamber Temperature Control Range
What is the chamber temperature control range?
0
ANYCUBIC Kobra Neo
0Votes
None
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Range of temperatures the printer chamber can maintain
Don’t keep it to yourself — be the first to react and review the
Chamber Temperature Control Range on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Dual Extruders
Does it support dual extruders?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Indicates if printer can run dual extruders.
In the battle of Dual Extruders,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Dual Extruders on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Independent Dual Extruder
Does it have IDEX support?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Whether the printer supports independent extruder heads.
In the battle of Independent Dual Extruder,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Independent Dual Extruder on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Quick-Swap Nozzles
Does it have quick-swap nozzles?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Nozzles can be quickly swapped without tools.
In the battle of Quick-Swap Nozzles,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Quick-Swap Nozzles on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Hotend Replaceable
Is the hotend replaceable?
Yes
0Votes
ANYCUBIC Kobra Neo
Yes
0Votes
Creality Ender-3
Whether the hotend can be replaced.
In the battle of Hotend Replaceable,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Hotend Replaceable on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Extruder Drive Type
What type of extruder drive does it use?
0
ANYCUBIC Kobra Neo
0Votes
Direct Drive
0
Creality Ender-3
0Votes
Bowden
vs
Extruder Drive Type
ANYCUBIC Kobra Neo uses a Direct Drive extruder, offering better control for flexible filaments, while Creality Ender-3 utilizes a Bowden extruder. The Kobra Neo's direct drive is generally preferred for its precision and material compatibility.
The type of filament feeding system.
In the battle of Extruder Drive Type,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Extruder Drive Type on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Creality Ender-3 supports a wider variety of filament types, including Nylon, Carbon Fiber, PVA, PC, ASA, and HIPS, in addition to the types supported by ANYCUBIC Kobra Neo. The Ender-3 offers greater material versatility for advanced projects.
Filament materials that the printer can process.
In the battle of Supported Filament Types,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Based on community votes for Supported Filament Types,
ANYCUBIC Kobra Neo ◉ earned
0 votes,
less than
Creality Ender-3 ◉,
which got 1 votes.
The Ender-3 supports way more filament types, which is awesome for trying out different materials and projects. Kobra Neo is good but less flexible here.
See more
Third-Party Material
Does it support third-party materials?
Yes
0Votes
ANYCUBIC Kobra Neo
Yes
0Votes
Creality Ender-3
ANYCUBIC Kobra Neo
This printer supports the use of third-party materials, providing users with a wider range of filament choices beyond proprietary options.
Ability to use non-proprietary materials.
In the battle of Third-Party Material,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Third-Party Material on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Supported Resin Types
What resin types are supported?
0
ANYCUBIC Kobra Neo
0Votes
None
0
Creality Ender-3
0Votes
None
ANYCUBIC Kobra Neo
This FDM printer does not use resin, therefore it supports None resin types.
Resin types that the printer can use.
In the battle of Supported Resin Types,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Supported Resin Types on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Max Supported Filament Diameter
What is the maximum supported filament diameter?
1.75
mm
0Votes
1.75
mm
0Votes
Maximum filament diameter that can be used.
In the battle of Max Supported Filament Diameter,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
, delivering
equal
1.75 mm
measurement.
Don’t keep it to yourself — be the first to react and review the
Max Supported Filament Diameter on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Filament Dry Box
Does it support filament dry boxes?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Supports use of a dry box to prevent filament moisture issues.
In the battle of Filament Dry Box,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Filament Dry Box on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Filament Auto-Loading
Does it have filament auto-loading?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Automatic feeding of filament into extruder.
In the battle of Filament Auto-Loading,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Filament Auto-Loading on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Filament Drying Required
Is filament drying required?
Yes
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
vs
Filament Drying Required
ANYCUBIC Kobra Neo explicitly states filament drying is required, while this information is unavailable for Creality Ender-3. Kobra Neo users should be prepared for filament pre-treatment for optimal results.
Whether drying filament before use is necessary.
In the battle of Filament Drying Required,
ANYCUBIC Kobra Neo ◉ is
worse than
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Filament Drying Required on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Multi-Material Printing
Can it print with multiple materials?
Who knows?
0Votes
ANYCUBIC Kobra Neo
(Help us out by suggesting one!)
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Ability to print with multiple materials simultaneously.
Don’t keep it to yourself — be the first to react and review the
Multi-Material Printing on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Max Number of Materials Supported
What is the maximum number of materials supported?
0
ANYCUBIC Kobra Neo
0Votes
1
0
Creality Ender-3
0Votes
1
Maximum distinct materials supported in one job.
In the battle of Max Number of Materials Supported,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Max Number of Materials Supported on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Compatible Resin Wavelength
What resin wavelength is compatible?
Who knows?
0Votes
ANYCUBIC Kobra Neo
(Help us out by suggesting one!)
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Light wavelength compatibility for curing resins.
Don’t keep it to yourself — be the first to react and review the
Compatible Resin Wavelength on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Max Resin Tank Capacity
What is the maximum resin tank capacity?
Who knows?
0Votes
ANYCUBIC Kobra Neo
(Help us out by suggesting one!)
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Maximum amount of resin the tank can hold.
Don’t keep it to yourself — be the first to react and review the
Max Resin Tank Capacity on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Resin Auto-Fill
Does it have resin auto-fill?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Automatic filling of resin during prints.
In the battle of Resin Auto-Fill,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Resin Auto-Fill on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Biocompatible Materials Support
Does it support biocompatible materials?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Supports resins/filaments approved for medical or dental use.
In the battle of Biocompatible Materials Support,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Biocompatible Materials Support on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Creality Ender-3 boasts an official max print speed of 180 mm/s, significantly faster than ANYCUBIC Kobra Neo's 100 mm/s. The Ender-3 can complete prints in a shorter timeframe.
Manufacturer-claimed maximum print speed.
In the battle of Official Max Print Speed,
ANYCUBIC Kobra Neo ◉ is
worse than
Creality Ender-3 ◉
, delivering
lower
80.0 mm/s
measurement.
Based on community votes for Official Max Print Speed,
ANYCUBIC Kobra Neo ◉ earned
0 votes,
less than
Creality Ender-3 ◉,
which got 1 votes.
ANYCUBIC Kobra Neo has a quieter idle noise level of 40 dB compared to Creality Ender-3's 50 dB. The Kobra Neo offers a more peaceful environment when not actively printing.
Measures the noise when printer is on but not printing; lower is better.
In the battle of Idle Noise Level,
ANYCUBIC Kobra Neo ◉ is
better than
Creality Ender-3 ◉
, delivering
lower
10.0 dB
measurement.
Don’t keep it to yourself — be the first to react and review the
Idle Noise Level on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Time to Print Benchy
How long does it take to print a Benchy?
120
minutes
0Votes
90
minutes
0Votes
vs
Time to Print Benchy
The Creality Ender-3 can print a Benchy in 90 minutes, which is faster than the ANYCUBIC Kobra Neo's 120 minutes. The Ender-3 offers quicker benchmark printing.
Average time to complete the benchmark “Benchy” model.
In the battle of Time to Print Benchy,
ANYCUBIC Kobra Neo ◉ is
worse than
Creality Ender-3 ◉
, delivering
higher
30.0 minutes
measurement.
Don’t keep it to yourself — be the first to react and review the
Time to Print Benchy on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Print Accuracy
What is the print accuracy?
100
microns
0Votes
100
microns
0Votes
Creality Ender-3
The print accuracy is 100 microns, which indicates the smallest detail the printer can consistently reproduce. This is equivalent to 0.1 mm.
Degree of dimensional accuracy of printed parts.
In the battle of Print Accuracy,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
, delivering
equal
100.00 microns
measurement.
Don’t keep it to yourself — be the first to react and review the
Print Accuracy on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Print Adhesion Type
What type of print adhesion is used?
0
ANYCUBIC Kobra Neo
0Votes
PEI
0
Creality Ender-3
0Votes
Other
vs
Print Adhesion Type
ANYCUBIC Kobra Neo uses PEI for print adhesion, while Creality Ender-3 lists 'Other'. PEI build surfaces are highly regarded for their durability and reliable adhesion across many filament types.
Method used to secure prints to the bed.
In the battle of Print Adhesion Type,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Print Adhesion Type on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Bridging Performance
What is the bridging performance?
50
mm
0Votes
50
mm
0Votes
Creality Ender-3
The bridging performance is 50 mm. This indicates the printer's ability to span a 50 mm horizontal gap in a print without requiring support structures beneath it.
Longest unsupported horizontal span printed without sagging.
In the battle of Bridging Performance,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
, delivering
equal
50.00 mm
measurement.
Don’t keep it to yourself — be the first to react and review the
Bridging Performance on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Print Recovery
Does the printer support print recovery?
Yes
0Votes
ANYCUBIC Kobra Neo
Yes
0Votes
Creality Ender-3
Creality Ender-3
The print recovery feature enables the printer to resume a print job from where it left off after an unexpected interruption, such as a power outage. This helps prevent print failures and saves material.
Ability to resume print after power loss or interruption.
In the battle of Print Recovery,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Print Recovery on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Print Success Rate
What is the print success rate?
90
%
0Votes
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
vs
Print Success Rate
The ANYCUBIC Kobra Neo reports a 90% print success rate, while this information is unavailable for the Creality Ender-3. This provides a clear expectation of reliability for the Kobra Neo.
Percentage of prints successfully completed.
Don’t keep it to yourself — be the first to react and review the
Print Success Rate on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Operating Noise Level
What is the operating noise level?
50
dB
0Votes
50
dB
0Votes
Creality Ender-3
The operating noise level is 50 dB. This noise level is comparable to a quiet office environment, making it suitable for use in various settings without significant disturbance.
Measures the sound generated during printing; lower is quieter.
In the battle of Operating Noise Level,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
, delivering
equal
50.00 dB
measurement.
Don’t keep it to yourself — be the first to react and review the
Operating Noise Level on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
First Layer Calibration
How is the first layer calibrated?
0
ANYCUBIC Kobra Neo
1Votes
Auto
0
Creality Ender-3
0Votes
Manual
vs
First Layer Calibration
ANYCUBIC Kobra Neo features Automatic first layer calibration, whereas Creality Ender-3 requires Manual calibration. The Kobra Neo simplifies the crucial first layer setup for users.
Method used for first-layer bed calibration.
In the battle of First Layer Calibration,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Based on community votes for First Layer Calibration,
ANYCUBIC Kobra Neo ◉ earned
1 votes,
more than
Creality Ender-3 ◉,
which got 0 votes.
Auto bed leveling on the Kobra Neo is a game changer for beginners like me. Manual leveling is such a pain to deal with every time.
See more
Measured Effective Print Speed
What is the effective measured print speed?
60
mm/s
0Votes
60
mm/s
0Votes
Independently measured real-world print speed.
In the battle of Measured Effective Print Speed,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
, delivering
equal
60.00 mm/s
measurement.
Don’t keep it to yourself — be the first to react and review the
Measured Effective Print Speed on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Overhang Performance
What is the overhang performance?
60
degrees
0Votes
45
degrees
0Votes
vs
Overhang Performance
ANYCUBIC Kobra Neo has an overhang performance of 60 degrees, which is better than Creality Ender-3's 45 degrees. The Kobra Neo can handle more complex geometries without requiring extensive supports.
Maximum angle of unsupported overhangs achievable.
In the battle of Overhang Performance,
ANYCUBIC Kobra Neo ◉ is
better than
Creality Ender-3 ◉
, delivering
higher
15.0 degrees
measurement.
Don’t keep it to yourself — be the first to react and review the
Overhang Performance on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Spaghetti/Fault Detection
Does it have spaghetti or fault detection?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Detects failed prints or filament tangles.
In the battle of Spaghetti/Fault Detection,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Spaghetti/Fault Detection on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Continuous Print Time
What is the max continuous print time?
72
hours
0Votes
72
hours
0Votes
Maximum supported printing time without interruption.
In the battle of Continuous Print Time,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
, delivering
equal
72.00 hours
measurement.
Don’t keep it to yourself — be the first to react and review the
Continuous Print Time on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Print Quality Rating
What is the print quality rating?
0
ANYCUBIC Kobra Neo
0Votes
7
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
vs
Print Quality Rating
ANYCUBIC Kobra Neo has a print quality rating of 7, while this information is unavailable for Creality Ender-3. The Kobra Neo provides a numerical indication of its print fidelity.
Rated score for overall print quality (0–10).
Don’t keep it to yourself — be the first to react and review the
Print Quality Rating on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
The build plate is removable, which simplifies the process of print removal and makes cleaning easier.
Creality Ender-3
The build plate is removable, which significantly simplifies the process of detaching finished prints. This also makes cleaning and preparing the bed for the next job more convenient.
Whether the build plate can be detached for print removal.
In the battle of Build Plate Removable,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Build Plate Removable on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Creality Ender-3 has a screen size of 2.8 inches, which is slightly larger than ANYCUBIC Kobra Neo's 2.4 inches. The Ender-3 offers a marginally bigger display.
Size of the display screen.
In the battle of Screen Size,
ANYCUBIC Kobra Neo ◉ is
worse than
Creality Ender-3 ◉
, delivering
lower
0.4 Inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Screen Size on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
The build plate features a Textured surface. This type of surface often improves print adhesion and can leave a distinct matte finish on the bottom of printed objects.
Surface finish of the build plate.
In the battle of Build Plate Surface Texture,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Build Plate Surface Texture on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
ANYCUBIC Kobra Neo includes a filament runout sensor, which is not available for Creality Ender-3. This sensor prevents print failures by pausing the job when filament runs out.
Detects when filament runs out and pauses printing.
In the battle of Filament Runout Sensor,
ANYCUBIC Kobra Neo ◉ is
better than
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Filament Runout Sensor on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Both the ANYCUBIC Kobra Neo and Creality Ender-3 feature power loss recovery, allowing prints to resume after an unexpected power interruption. This is a crucial feature for long print jobs.
Recovers print jobs after power interruptions.
In the battle of Power Loss Recovery,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Power Loss Recovery on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
ANYCUBIC Kobra Neo comes with auto bed leveling, a convenient feature not available in the Creality Ender-3. The Kobra Neo greatly simplifies the bed leveling process for users.
Automatic calibration of the print bed.
In the battle of Auto Bed Leveling,
ANYCUBIC Kobra Neo ◉ is
better than
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Auto Bed Leveling on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Creality Ender-3 supports manual bed leveling, a precise control option, while this information is unavailable for ANYCUBIC Kobra Neo. Manual leveling allows experienced users to fine-tune their bed.
Support for traditional manual bed leveling.
In the battle of Manual Bed Leveling,
ANYCUBIC Kobra Neo ◉ is
worse than
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Manual Bed Leveling on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
In the battle of Vibration Compensation,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Vibration Compensation on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Enclosure
Is the printer open or enclosed?
0
ANYCUBIC Kobra Neo
0Votes
Open
0
Creality Ender-3
0Votes
Open
ANYCUBIC Kobra Neo
An Open enclosure means the printer does not have enclosed sides, which can affect print stability for certain materials and increase noise.
Creality Ender-3
The printer features an Open enclosure design. Open enclosures are common for FDM printers and are suitable for materials like PLA, but may require external ventilation for filaments prone to warping or emitting fumes.
Whether the printer has an open or enclosed build chamber.
In the battle of Enclosure,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Enclosure on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Air Filtration
What type of air filtration is included?
0
ANYCUBIC Kobra Neo
0Votes
None
0
Creality Ender-3
0Votes
None
ANYCUBIC Kobra Neo
The absence of None air filtration means the printer does not actively filter fumes or particles, which might be a consideration for ventilation in the printing environment.
Creality Ender-3
The printer does not come with a built-in air filtration system. This means it relies on external ventilation or open-air operation.
Air filtering system for reducing fumes and particulates.
In the battle of Air Filtration,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Air Filtration on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Frame Type
What is the frame type?
0
ANYCUBIC Kobra Neo
0Votes
Cartesian
0
Creality Ender-3
0Votes
Cartesian
ANYCUBIC Kobra Neo
The Cartesian frame type uses X, Y, and Z axes to move the print head and build plate, a common and reliable design in FDM printers.
Mechanical structure style of the printer.
In the battle of Frame Type,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Frame Type on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Chamber Lighting Color Modes
What chamber lighting modes are available?
0
ANYCUBIC Kobra Neo
0Votes
None
0
Creality Ender-3
0Votes
None
ANYCUBIC Kobra Neo
As there is no built-in chamber lighting, there are None color modes available.
Options for chamber lighting colors.
In the battle of Chamber Lighting Color Modes,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Chamber Lighting Color Modes on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Motion System
What is the motion system?
0
ANYCUBIC Kobra Neo
0Votes
Belts
0
Creality Ender-3
0Votes
Belts, Rods
vs
Motion System
ANYCUBIC Kobra Neo uses 'Belts' for its motion system, while Creality Ender-3 uses a combination of 'Belts,Rods'. The Ender-3 incorporates multiple mechanisms for movement.
Mechanical motion system guiding the print head.
In the battle of Motion System,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Motion System on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Touchscreen Display
Does it have a touchscreen display?
Yes
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
vs
Touchscreen Display
ANYCUBIC Kobra Neo includes a touchscreen display for easy interaction, a feature not available for Creality Ender-3. The Kobra Neo offers a more modern and intuitive user interface.
Indicates if a touchscreen is provided for controls.
In the battle of Touchscreen Display,
ANYCUBIC Kobra Neo ◉ is
better than
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Touchscreen Display on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Screen Resolution
What is the display resolution?
0
ANYCUBIC Kobra Neo
0Votes
480x272p
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
vs
Screen Resolution
ANYCUBIC Kobra Neo has a screen resolution of 480x272p, while this information is unavailable for Creality Ender-3. The Kobra Neo offers a specified display quality.
Resolution of the display screen.
Don’t keep it to yourself — be the first to react and review the
Screen Resolution on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Built-in Camera
Does it have a built-in camera?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Camera for monitoring prints and creating time-lapses.
In the battle of Built-in Camera,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Built-in Camera on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Lighting Inside Chamber
Does it have chamber lighting?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Chamber lighting to monitor prints in progress.
In the battle of Lighting Inside Chamber,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Lighting Inside Chamber on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Build Plate Type
What type of build plate does it have?
0
ANYCUBIC Kobra Neo
0Votes
PEI, Spring Sheet, Metal
0
Creality Ender-3
0Votes
Flex
vs
Build Plate Type
ANYCUBIC Kobra Neo utilizes a 'PEI, Spring Sheet, Metal' build plate, whereas Creality Ender-3 uses a 'Flex' type. The Kobra Neo's multi-material build plate indicates robust construction.
Type of build surface material.
In the battle of Build Plate Type,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Build Plate Type on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Toolhead Modularity
What modular toolheads are supported?
0
ANYCUBIC Kobra Neo
0Votes
None
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Whether the toolhead can be swapped for other functions.
Don’t keep it to yourself — be the first to react and review the
Toolhead Modularity on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Available connection types for file transfer and control.
In the battle of Connectivity Options,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Connectivity Options on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Creality Ender-3 supports a broader range of slicers, including PrusaSlicer and Orca Slicer, in addition to those supported by ANYCUBIC Kobra Neo. The Ender-3 offers more choice for users with specific slicer preferences.
Slicer programs that are compatible with the printer.
In the battle of Supported Slicers,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Supported Slicers on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Remote Monitoring
Does it support remote monitoring?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Ability to monitor prints remotely via app or web.
In the battle of Remote Monitoring,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Remote Monitoring on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Cloud-Based Software
Does it support cloud-based software?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Indicates whether the printer uses or supports cloud software.
In the battle of Cloud-Based Software,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Cloud-Based Software on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Proprietary Software Required
Is proprietary software required?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Whether use of manufacturer’s software is mandatory.
In the battle of Proprietary Software Required,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Proprietary Software Required on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
File Transfer Method
What file transfer methods are supported?
0
ANYCUBIC Kobra Neo
0Votes
SD Card, USB
0
Creality Ender-3
0Votes
USB, SD Card
Methods available to transfer files to the printer.
In the battle of File Transfer Method,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
File Transfer Method on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Creality Ender-3 supports additional file formats like 3MF and AMF beyond those supported by ANYCUBIC Kobra Neo. The Ender-3 offers wider compatibility with various 3D model formats.
File types accepted for printing.
In the battle of Supported File Formats,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Supported File Formats on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Mobile App
Does it support a mobile app?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Ability to use a mobile app for control/monitoring.
In the battle of Mobile App,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Mobile App on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
API/SDK Integration
Does it support API/SDK integration?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Allows developers to integrate with APIs or SDKs.
In the battle of API/SDK Integration,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
API/SDK Integration on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
In the battle of Multi-Printer Fleet Control,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Multi-Printer Fleet Control on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Time-Lapse Recording
Does it support time-lapse recording?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Ability to capture time-lapse videos of prints.
In the battle of Time-Lapse Recording,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Time-Lapse Recording on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Firmware Update
Does the printer support firmware updates?
Yes
0Votes
ANYCUBIC Kobra Neo
Yes
0Votes
Creality Ender-3
Indicates whether the printer supports firmware updates; important for new features and bug fixes.
In the battle of Firmware Update,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Firmware Update on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Remote Firmware Update
Does it support remote firmware updates?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Supports updating firmware remotely.
In the battle of Remote Firmware Update,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Remote Firmware Update on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Resin Workflow
10
UV Light Source Type
What UV light source type does it use?
0
ANYCUBIC Kobra Neo
0Votes
None
0
Creality Ender-3
0Votes
None
ANYCUBIC Kobra Neo
As an FDM printer, it uses None UV light source, which is typically found in resin-based (SLA/DLP) 3D printers for curing photosensitive resins.
Type of UV light source used to cure resin layers.
In the battle of UV Light Source Type,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
UV Light Source Type on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
UV Power Output
What is the UV power output?
Who knows?
0Votes
ANYCUBIC Kobra Neo
(Help us out by suggesting one!)
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Strength of UV light exposure affecting curing speed and accuracy.
Don’t keep it to yourself — be the first to react and review the
UV Power Output on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Resin Layer Curing Speed
What is the resin layer curing speed?
Who knows?
0Votes
ANYCUBIC Kobra Neo
(Help us out by suggesting one!)
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Time required to cure one resin layer.
Don’t keep it to yourself — be the first to react and review the
Resin Layer Curing Speed on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Resin Tank Lifetime
What is the resin tank lifetime?
0
ANYCUBIC Kobra Neo
0Votes
None
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Approximate number of prints before resin tank replacement.
Don’t keep it to yourself — be the first to react and review the
Resin Tank Lifetime on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Resin Cartridge System
Does it use a resin cartridge system?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Whether it uses a sealed resin cartridge system for easy handling.
In the battle of Resin Cartridge System,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Resin Cartridge System on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Auto Resin Mixing
Does it have auto resin mixing?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Whether resin is automatically mixed during operation for consistency.
In the battle of Auto Resin Mixing,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Auto Resin Mixing on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Resin Heating System
Does it have a resin heating system?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Whether the printer can heat resin for optimal viscosity.
In the battle of Resin Heating System,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Resin Heating System on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Wash Time
What is the wash time?
Who knows?
0Votes
ANYCUBIC Kobra Neo
(Help us out by suggesting one!)
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Typical duration to wash prints in post-processing.
Don’t keep it to yourself — be the first to react and review the
Wash Time on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Cure Time
What is the cure time?
Who knows?
0Votes
ANYCUBIC Kobra Neo
(Help us out by suggesting one!)
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Typical duration to fully cure resin prints after washing.
Don’t keep it to yourself — be the first to react and review the
Cure Time on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Post-Processing Equipment Compatibility
Is it compatible with post-processing equipment?
No
0Votes
ANYCUBIC Kobra Neo
Yes
0Votes
Creality Ender-3
vs
Post-Processing Equipment Compatibility
Creality Ender-3 confirms compatibility with post-processing equipment, whereas this information is unavailable for ANYCUBIC Kobra Neo. The Ender-3 indicates readiness for a full post-print workflow.
Whether the printer supports integration with wash/cure stations.
In the battle of Post-Processing Equipment Compatibility,
ANYCUBIC Kobra Neo ◉ is
worse than
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Post-Processing Equipment Compatibility on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
ANYCUBIC Kobra Neo includes 3 safety sensors, while this information is unavailable for Creality Ender-3. The Kobra Neo provides specific details on its built-in safety measures.
Number of safety sensors installed in the printer.
Don’t keep it to yourself — be the first to react and review the
Safety Sensors Count on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Safety Certifications
What safety certifications does it have?
0
ANYCUBIC Kobra Neo
0Votes
CE, FCC
0
Creality Ender-3
0Votes
CE, FCC, RoHS
vs
Safety Certifications
Creality Ender-3 holds 'CE,FCC,RoHS' certifications, including RoHS for environmental compliance, while ANYCUBIC Kobra Neo has 'CE, FCC'. The Ender-3 offers broader compliance.
Official safety standards the printer complies with.
In the battle of Safety Certifications,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Safety Certifications on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Enclosure Lock
Does it have an enclosure lock?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Prevents accidental access to the chamber while printing.
In the battle of Enclosure Lock,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Enclosure Lock on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Emergency Stop Button
Does it have an emergency stop button?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Dedicated button to stop the printer instantly in emergencies.
In the battle of Emergency Stop Button,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Emergency Stop Button on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Fireproof Build Plate
Does it have a fireproof build plate?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Build plate is resistant to fire for extra safety.
In the battle of Fireproof Build Plate,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Fireproof Build Plate on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Overheat Protection
Does it feature overheat protection?
Yes
0Votes
ANYCUBIC Kobra Neo
Yes
0Votes
Creality Ender-3
Shuts down printer when components exceed safe temps.
In the battle of Overheat Protection,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Overheat Protection on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Auto Shutdown on Error
Does it auto shut down on errors?
Yes
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
vs
Auto Shutdown on Error
ANYCUBIC Kobra Neo features auto shutdown on error, a safety mechanism not available for Creality Ender-3. The Kobra Neo enhances safety by automatically halting operations in case of an issue.
Shuts printer down automatically when critical errors occur.
In the battle of Auto Shutdown on Error,
ANYCUBIC Kobra Neo ◉ is
better than
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Auto Shutdown on Error on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Resin Spill Protection
Does it have resin spill protection?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Prevents or contains resin leaks in resin printers.
In the battle of Resin Spill Protection,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Resin Spill Protection on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Child Lock Mode
Does it have a child lock mode?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
A setting that prevents unauthorized or unsafe use by children.
In the battle of Child Lock Mode,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Child Lock Mode on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Air Quality Compliance
Is it compliant with air quality standards?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Meets air quality standards for emissions and filtration.
In the battle of Air Quality Compliance,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Air Quality Compliance on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
0
Creality Ender-3
0Votes
Multi-Material, Laser, CNC, Enclosure, Camera
vs
Upgrade Options
Creality Ender-3 offers a wide array of upgrade options, including Multi-Material, Laser, and CNC, in addition to Enclosure and Camera options, compared to ANYCUBIC Kobra Neo's more limited options. The Ender-3 provides greater modularity and customization potential.
Supported upgrade kits and modules for expanding functionality.
In the battle of Upgrade Options,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Upgrade Options on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Lubrication Required
Does it require lubrication?
Yes
0Votes
ANYCUBIC Kobra Neo
Yes
0Votes
Creality Ender-3
Creality Ender-3
Regular lubrication is required to maintain the printer's moving parts. This ensures smooth, reliable operation and extends the lifespan of the mechanical components.
Indicates if lubrication is needed for smooth operation.
In the battle of Lubrication Required,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Lubrication Required on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Nozzle Replaceable
Is the nozzle replaceable?
Yes
0Votes
ANYCUBIC Kobra Neo
Yes
0Votes
Creality Ender-3
Specifies if the nozzle can be replaced with different sizes or when worn.
In the battle of Nozzle Replaceable,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Nozzle Replaceable on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Spare Parts Availability
Are spare parts available?
Yes
0Votes
ANYCUBIC Kobra Neo
Yes
0Votes
Creality Ender-3
Whether spare parts are readily available for purchase.
In the battle of Spare Parts Availability,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Spare Parts Availability on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
In the battle of Supported Mod Kits,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Supported Mod Kits on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Self-Diagnostics
Does it have self-diagnostics?
Yes
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
vs
Self-Diagnostics
ANYCUBIC Kobra Neo features self-diagnostics to help identify issues, a feature not available for Creality Ender-3. The Kobra Neo can assist users in troubleshooting.
Printer can analyze itself for common faults and errors.
In the battle of Self-Diagnostics,
ANYCUBIC Kobra Neo ◉ is
better than
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Self-Diagnostics on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Maintenance Reminders
Does it provide maintenance reminders?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Automated alerts to schedule maintenance tasks.
In the battle of Maintenance Reminders,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Maintenance Reminders on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Predictive Maintenance Alerts
Does it feature predictive maintenance alerts?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Predicts potential failures and alerts the user before issues arise.
In the battle of Predictive Maintenance Alerts,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Predictive Maintenance Alerts on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Tool-Free Maintenance
Is tool-free maintenance supported?
Yes
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
vs
Tool-Free Maintenance
ANYCUBIC Kobra Neo supports tool-free maintenance, offering greater convenience, while this feature is unavailable for Creality Ender-3. The Kobra Neo is designed for easier and faster upkeep.
Allows key maintenance tasks without tools.
In the battle of Tool-Free Maintenance,
ANYCUBIC Kobra Neo ◉ is
better than
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Tool-Free Maintenance on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Service Interval
What is the service interval?
500
hours
0Votes
Who knows?
0Votes
Creality Ender-3
(Help us out by suggesting one!)
Recommended time between major servicing.
Don’t keep it to yourself — be the first to react and review the
Service Interval on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Business & Professional Features
10
Print Farm Management
Does it support print farm management?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Indicates if multiple printers can be networked and managed as a farm.
In the battle of Print Farm Management,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Print Farm Management on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Cloud Fleet Management
Does it support cloud fleet management?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Ability to manage multiple devices remotely via cloud software.
In the battle of Cloud Fleet Management,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Cloud Fleet Management on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Workflow Integration
Does it integrate with workflows?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Integration with professional workflow tools and design platforms.
In the battle of Workflow Integration,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Workflow Integration on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Multi-User Profiles
Does it support multi-user profiles?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Allows multiple users to have distinct profiles and permissions.
In the battle of Multi-User Profiles,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Multi-User Profiles on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Remote Access Control
Does it support remote access control?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Ability to control printer access remotely with permissions.
In the battle of Remote Access Control,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Remote Access Control on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Enterprise Security Features
Does it have enterprise security features?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Advanced security measures like encryption, secure login, and permissions.
In the battle of Enterprise Security Features,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Enterprise Security Features on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Licensing Options
Are licensing options available?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Availability of enterprise licensing for organizations.
In the battle of Licensing Options,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Licensing Options on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Usage Analytics Dashboard
Does it include a usage analytics dashboard?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Provides usage statistics and analytics for tracking productivity and costs.
In the battle of Usage Analytics Dashboard,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Usage Analytics Dashboard on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
SLA & Support Contracts
Are SLA or support contracts available?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Option for service-level agreements and premium support contracts.
In the battle of SLA & Support Contracts,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
SLA & Support Contracts on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Predictive Cost Estimation
Does it have predictive cost estimation?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Estimates printing costs (material, power, time) before job start.
In the battle of Predictive Cost Estimation,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Predictive Cost Estimation on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
The 3D printer is equipped with bed temperature sensors, allowing for precise control and monitoring of the build plate's heat during printing.
Detects and regulates the build plate temperature.
In the battle of Bed Temperature Sensors,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Bed Temperature Sensors on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Sensor Count
How many sensors are included?
0
ANYCUBIC Kobra Neo
0Votes
3
0
Creality Ender-3
0Votes
5
vs
Sensor Count
Creality Ender-3 has a total sensor count of 5, which is higher than ANYCUBIC Kobra Neo's 3 sensors. The Ender-3 integrates more sensors for monitoring various aspects of its operation.
total number of sensors installed in the printer.
In the battle of Sensor Count,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Sensor Count on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Vibration Sensor
Does it include a vibration sensor?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Detects vibrations and compensates for print accuracy.
In the battle of Vibration Sensor,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Vibration Sensor on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Print Log Storage
Does it have print log storage?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Records print job history and diagnostic data.
In the battle of Print Log Storage,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Print Log Storage on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Remote Error Alerts
Does it provide remote error alerts?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Sends error notifications to remote devices.
In the battle of Remote Error Alerts,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Remote Error Alerts on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Predictive Failure Logs
Does it support predictive failure logs?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Tracks and predicts potential failures before they occur.
In the battle of Predictive Failure Logs,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Predictive Failure Logs on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Calibration History Log
Does it have a calibration history log?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Stores history of calibration for quality control.
In the battle of Calibration History Log,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Calibration History Log on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Chamber Temperature Sensors
Does it have chamber temperature sensors?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Tracks and maintains chamber temperature for consistent prints.
In the battle of Chamber Temperature Sensors,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Chamber Temperature Sensors on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Filament Jam Detection
Does it support filament jam detection?
Yes
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
vs
Filament Jam Detection
ANYCUBIC Kobra Neo includes filament jam detection, a helpful sensor to prevent print failures, which is not available for Creality Ender-3. The Kobra Neo adds another layer of print reliability.
Detects blockages or jams in the filament path.
In the battle of Filament Jam Detection,
ANYCUBIC Kobra Neo ◉ is
better than
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Filament Jam Detection on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Extruder Pressure Sensor
Does it have an extruder pressure sensor?
No
0Votes
ANYCUBIC Kobra Neo
No
0Votes
Creality Ender-3
Monitors extrusion pressure to prevent under- or over-extrusion.
In the battle of Extruder Pressure Sensor,
ANYCUBIC Kobra Neo ◉ is
same as
Creality Ender-3 ◉
.
Don’t keep it to yourself — be the first to react and review the
Extruder Pressure Sensor on ANYCUBIC Kobra Neo ◉
vs Creality Ender-3 ◉ and help others decide!
Surveys
Because hot takes deserve votes.
Printing Speed
How would you rate the printing speed of this 3D printer?
Lightning fast — Under 2 hours
0Votes
0Votes
Very fast — 2 to 5 hours
0Votes
0Votes
Fast — 5 to 10 hours
0Votes
0Votes
Moderate speed — 10 to 20 hours
0Votes
0Votes
Very slow — Over 20 hours
0Votes
0Votes
Print Quality and Detail
How would you describe the print quality and level of detail produced by this 3D printer?
Ultra fine detail — Layer height below 0.05 mm
0Votes
0Votes
Fine detail — Layer height 0.05 to 0.1 mm
0Votes
0Votes
Good detail — Layer height 0.1 to 0.2 mm
0Votes
0Votes
Decent detail — Layer height 0.2 to 0.3 mm
0Votes
0Votes
Rough and basic — Layer height above 0.3 mm
0Votes
0Votes
Build Volume Capacity
How do you find the build volume capacity of this 3D printer?
Extra large projects — Over 400 mm each side
0Votes
0Votes
Large projects — 300 to 400 mm each side
0Votes
0Votes
Medium projects — 200 to 300 mm each side
0Votes
0Votes
Small projects — 150 to 200 mm each side
0Votes
0Votes
Tiny prints only — Under 150 x 150 x 150 mm
0Votes
0Votes
Material Consumption Efficiency
How efficient is this 3D printer in using filament or resin materials?
Very efficient — Under 50 grams per model
0Votes
0Votes
Efficient — 50 to 70 grams per model
0Votes
0Votes
Decent efficiency — 70 to 100 grams per model
0Votes
0Votes
Average efficiency — 100 to 150 grams per model
0Votes
0Votes
Wasteful — Over 150 grams per model
0Votes
0Votes
Noise Level
How noisy is this 3D printer during operation?
Whisper quiet
0Votes
0Votes
Quiet most of the time
0Votes
0Votes
Manageable with background noise
0Votes
0Votes
Noticeable but tolerable
0Votes
0Votes
Loud and distracting
0Votes
0Votes
Durability and Lifespan
How durable does this 3D printer seem in terms of lifespan?
Very durable — Over 5 years
0Votes
0Votes
Long lasting — 3 to 5 years
0Votes
0Votes
Decent lifespan — 2 to 3 years
0Votes
0Votes
Short lifespan — 1 to 2 years
0Votes
0Votes
Breaks down quickly — Under 1 year
0Votes
0Votes
Performance
How would you rate the overall performance of this 3D printer in terms of print quality and reliability?
Excellent — Consistently produces high-quality prints with no issues
0Votes
0Votes
Good — Produces quality prints with minor inconsistencies
0Votes
0Votes
Average — Prints are acceptable with occasional issues
0Votes
0Votes
Below average — Frequent print failures or inconsistencies
0Votes
0Votes
Poor — Often fails to produce quality prints
0Votes
0Votes
Ease of Setup
How easy was the setup process for this 3D printer?
Very easy — The printer was simple to set up with clear instructions and minimal effort
0Votes
0Votes
Easy — Setup was straightforward, with only a few minor adjustments needed
0Votes
0Votes
Average — Setup was manageable but took time and required some troubleshooting
0Votes
0Votes
Challenging — Setup was difficult and required assistance from support or additional resources
0Votes
0Votes
Very difficult — Setup was complicated, with unclear instructions and many issues during the process
0Votes
0Votes
Pricing
How would you rate the pricing for this 3D printer?
Great value for money — Offers excellent features and performance at an affordable price
0Votes
0Votes
Pretty good price — Decent pricing for the features, a reasonable value
0Votes
0Votes
Fair deal — The price is acceptable but might be slightly high for the features offered
0Votes
0Votes
Kinda pricey — The price feels a bit high compared to similar models
0Votes
0Votes
Crazy expensive — The price is significantly higher than other options with similar features
0Votes
0Votes
Design Appeal
How would you rate the design appeal of this 3D printer?
Excellent — Sleek, modern design that looks great in any workspace
0Votes
0Votes
Good — Attractive and functional design that fits well in most environments
0Votes
0Votes
Average — Standard design with no particular standout features
0Votes
0Votes
Fair — Design feels bulky or outdated, but still serves its purpose
0Votes
0Votes
Poor — Unattractive design, clunky and may be an eyesore in most spaces
Supermod
Moderator
Recaptor
0
Cartling
